CRM Mitchell1

We Service and Repair all CRM Mitchell1 cars

  • 2017 Hyundai Tucson

    Hyundai Tucson
    Mileage
    99,874
    Service Date
    7/28/2023
    Services Performed
    • ADvise customer on front end damage
    • Mount and Balance1Tires
    • HEADLAMP BULB – Remove & Replace – One – [DOES NOT include adjustment.]
    • PERFORMED VEHICLE ALIGNMENT, ADJUSTED CAMBER CASTER AND TOE. TEST DROVE AND VEHICLE DROVE STRAIGHT.
     
    JEREMY M. gave our service a 5 star review on 7/28/2023
  • 2017 Kia Niro

    Kia Niro
    Mileage
    47,334
    Service Date
    7/20/2023
    Services Performed
    • Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
    • 4 WHEELS ROTATION COMPLETE
     
    Eden C. gave our service a 5 star review on 7/22/2023
  • 2018 Ford Focus

    Ford Focus
    Mileage
    83,429
    Service Date
    6/23/2023
    Services Performed
    • 90k checkup
     
    Vince M. gave our service a 5 star review on 6/23/2023
  • 2014 Nissan Versa

    Nissan Versa
    Mileage
    134,069
    Service Date
    6/16/2023
    Services Performed
    • Install blower motor per of customer request was not diagnosis by tech.
     
    Chad C. gave our service a 5 star review on 6/17/2023
  • 2017 Chevrolet Cruze

    Chevrolet Cruze
    Mileage
    105,330
    Service Date
    6/16/2023
    Services Performed
    • Advise customer on possible themostata and overheating.
     
    Kiara B. gave our service a 5 star review on 6/16/2023
  • 2020 Kia Sorento

    Kia Sorento
    Mileage
    35,458
    Service Date
    6/14/2023
    Services Performed
    • Diagnose and found dtc code p1326 which is indicating engine knock sensor concern, which is attached to the cylinder block and senses engine is knocking the sensor contains a piezoelectric element that converts vibration (or noise) into the voltage signal and sends this signal to the pcm. With this input signals from camshaft position and crankshaft position sensor ,pcm can identify engine is knocking at this time. Found oil is over full by 2.5 quarts which can cause hydraulic lock, Drained oil to correct level and verified internal engine damage is still present. Recommend replacing the engine at this time, recommended customer to dealer for possible warranty repair.
     
    This vehicle's owner gave our service a 5 star review on 6/14/2023
  • 2015 Infiniti QX80

    Infiniti QX80
    Mileage
    176,419
    Service Date
    6/14/2023
    Services Performed
    • Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
    • cleared codes, p0430, p0420.
     
    Tim O. gave our service a 5 star review on 6/14/2023
  • 2009 Nissan Cube

    Nissan Cube
    Mileage
    111,452
    Service Date
    6/8/2023
    Services Performed
    • Advise customer states may need trans flush
    • FLUSHED TRANSMISSION WITH SYNTHETIC AMS TRANSMISSION FLUID
    • CLEANED BATTERY TERMINALS AND ADDED BG BATTERY TERMINAL PAD KIT.
    • SPARK PLUGS – Remove & Replace – [Includes: R&I Intake Manifold. Includes: Perform Relearn procedure.]
    • FLUSHED INJECTORS AND CLEANED THROTTLE BODY.
     
    Travis L. gave our service a 5 star review on 6/8/2023
  • 2011 Toyota Tundra

    Toyota Tundra
    Mileage
    64,142
    Service Date
    6/6/2023
    Services Performed
    • Diagnosed dtc p2447 and found injection air pump has correct power and ground but it is not build pressure, no leaks found. Recommended new pump and retest.
    • Replaced air injection pump and cleared dtc. Checked and air pump building correct pressure. No leaks found and emission test passing.
     
    EDDIE T. gave our service a 5 star review on 6/6/2023
  • 2014 Chevrolet Impala Limited

    Chevrolet Impala Limited
    Mileage
    67,304
    Service Date
    6/1/2023
    Services Performed
    • Diagnose and found that hvac right side temp door motor is going out and making a loud noise also check the transmission and fluid is brownish and needs to be flushed
    • FLUSHED TRANSMISSION WITH SYNTHETIC AMS TRANSMISSION FLUID
    • HVAC DOOR ACTUATOR – Remove & Replace – Temp Door,Right – [Includes: R&I Glove Box.] – [DOES NOT include Air Conditioning System recover, evacuate and/or recharge.]
     
    Travis L. gave our service a 5 star review on 6/1/2023