2018 Jeep Wrangler JK
Mileage
55,850
Service Date
11/26/2024
Services Performed
- Upon inspection technician found a miss fire on #2 cylinder. Fuel balance rates indicate fuel system working fine, checked spark and ignition was working as designed. Checked compression and found compression was low, performed cylinder leak down test and found intake valve leaking, recommended replacing head for known concerns.
- Replaced left (drivers side) head with a new one and needed both VVTI gears replaced. Upon disassembly we checked the block and assured it was still true with a straight edge. Installed new head with all new gaskets, replaced oil with new oil and recharged the A/C and all checked out fine. Let the vehicle run for 30 minutes and then went for a test drive. Vehicle got up to temperature and drove as designed. All checked out good at this time.
- Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
Justin R. gave our service a 5 star review on 11/27/2024
