2004 Jeep Grand Cherokee
Mileage
198,068
Service Date
11/21/2024
Services Performed
- Inspected and tried to start vehicle with low fuel and it would not start there is no spark or injector pulse ,have good fuel pressure at 55psi and all plugs look decent .First went and pull codes and had no codes with pcm so this could be directing us towards the auto shut down relay ,installed a jumper relay and turned it on the asd slot and did the same on the stater relay to get it to start from the engine bay. With asd on ,can wiggle some wires around to get it to start and it ran for a second traced a wires to the pcm tested for grounds on pin 3 of c3 connectors have a good ground on the harness side but intermittent when the pcm is connected indicating either a bad wire or bad pcm need more diag time to verify.
- Replaced the Camshaft Position Sensor due to it was split in half test drove made sure there was good connection and vehicle is starting great.
- Replaced the camshaft connector getting a good connection with the cam senor test drove and working great.
Patrick M. gave our service a 5 star review on 11/21/2024
